Introducing the Brazin Frontline chassis!Stubby kit link

We have been testing this chassis for many weeks now all across the country and have been very happy with the results!

This chassis is designed to be used with the vanquish products VRD Carbon or Stance rtr.

This chassis features a forward skid design. The skid area of the chassis has been moved forward approximately 23mm from factory location

The belly area is raised around 7mm from stock allowing you to lower the entire truck down to improve center of gravity.

The rear shock hoop is moved rearward approximately 13mm to allow more rear shock pressure adjustments or to allow for stretched wheelbases and maintain shock angles.

NOTES: Please read!

This chassis requires vanquish products stubby kit for the transmission. It also requires modification to the front transmission mount that is supplied with the stubby kit to allow servo clearance, this can easily be done with a set of snips. Stubby Kit Link

You will also need to run servo on top of front axle for this setup  

This chassis requires driveshaft modifications, we recommend Dlux fab cut to length driveshafts. Pin to pin measurements as follows on 12.3mm wheelbase. Front driveshaft: 81mm, rear driveshaft: 118mm. Driveshaft Link

This chassis requires custom links. We recommend Hardcore RC links and we have provided them with specs specific to this setup. Links

Photos shown with parts not included in listing. Listing is for 1 pair of chassis rails only at this time.