SeVeR description

We are proud to introduce our new SeVeR chassis lineup. These chassis have been proven podium contenders across the USA by Brazin team drivers in 2024.

This platform has been designed from the ground up here’s the main changes all these platforms share.

- All 4 of these frames share will be the forward bias skid from our Hilow but this time we’ve squeezed in a dual servo mount cms capabilities.

-We also took notes from customers and team drivers and tucked the belly as high as possible which was one of the key features that made our C1 Pro so dominant in its classes.

-To make all that work we’ve made an entirely new flat DSM with integrated nutserts where possible as well as a fully adjustable Panhard mount.

-The skid has also been shrunk down to sporty proportions being 33% smaller than the “Mini skid” we currently sell, minimizing breakover snags.

-optimized shock tuning holes that follow and arch adding preload so the “lay down effect” is lessened and ride height can be managed easier.

SeVeR S1 chassis:

S1 chassis has a skid plate/belly area that is parallel to the ground making it legal for most “class 1” rule sets around the world. It is also set up to run chassis mounted servo, though there are provisions to run 4 link front suspension if you don’t need CMS. Also integrated into the chassis are provisions to install a carrier bearing setup for two piece rear driveshafts to aid in rear clearances.

SeVeR S2:

S2 takes the performance a step further with an angled skid plate to aid in breakover on steep ledges. It will also accept chassis mounted servo setups if you wish. Carrier bearing integration is also standard on S2 rails.

SeVeR S3:

S3 is a shortened front frame style chassis. This reduces overall weight, allows for shorter bodies, and gives a ton of room for servo on axle setups to avoid clearance issues. This chassis also retains the angled skid, and carrier bearing integration.

SeVeR S1 Leaf Spring:

We took the SeVeR S1 and converted it to leaf springs! With a “shackle reversal” on the front end rigid mounting the front of the front spring with the perch  Wll include Pair of chassis rails with rear hoops, Dual servo mount, a modified Delrin Skid optimized for this leaf frame, Rear Chassis Cross Brace and Universal Leaf Spring Kit.

Purchase Includes:

Purchasing S1 or S2 chassis the following items will be included

Pair of chassis rails

Pair of rear shock hoops

Dual servo mount (MJF printed)

Panhard mount

Sliders (MJF printed)

Delrin skid plate

Pair of aluminum accessory mounts

S3 includes:

Pair of chassis rails

Pair of rear shock hoops

Delrin skid plate

Sliders (MJF printed)

Pair of aluminum accessory mounts